Elite Roofers - Roofing Accessories

A roof is made up of more than just shingles. It requires underlayment, nails, ridge cap, drip edge, and a variety of flashing, that when installed properly create a complete roofing system that will last for many years to come. Whatever your goals for your new roof or roof repair, choosing the appropriate accessories can help your roof last longer, look better, and have overall improved performance. When getting a roof quote, some of the important accessories to look for are:

• Ridge Cap (also called Hip & Ridge)
• Ventilation
• Underlayment
• Drip Edge
• Pipe Flashings (also called pipe jack boots or pipe jacks)
• Type B Gas Vent Flashing (also called base, collar, and cap)
• Starter Shingles

Return to main Shingle Selection Page

Ridge cap shingles come in different quality levels and are used with different types of field shingles. The Landmark series of shingles can be installed with XT-25 as Hip & Ridge (cut 3-tabs), Shadow Ridge, Cedar Crest, or Mountain Ridge. CertainTeed's luxury line shingles are typically installed with either Cedar Crest or Shangle Ridge. You can see examples of each here.

Choose Shadow Ridge, Cedar Crest, Mountain Ridge, or Shangle Ridge for upgraded algae resistance and wind warranties.

CertainTeed will upgrade the Wind Warranty of Landmark Series shingles to 130 MPH when installed with Shadow Ridge, Cedar Crest, Mountain Ridge, or Shangle Ridge.

Proper attic ventilation is key to the longevity of your roof system. Not only that, but it also helps prevent moisture build-up in an otherwise humid attic space. With trained and certified attic ventilation professionals on staff, Elite Roofers can help you choose the right solution for venting your attic space. The intake is as important as the exhaust and the two should be in balance. And for attics that have been sealed with foam, there is not supposed to be any ventilation at all. As roofs and attics come in many different shapes and sizes, we refer to the applicable building codes and the instructions from the roofing materials manufacturers to ensure that we offer the appropriate solution for your home. This could mean:

• Ridge Vents
• Slant Back Vents
• Domed Vents
• Whirly Bird Vents
• Powered Attic Fans
• Soffit Vents
• Under-shingle Vents

A complete roof system requires underlayment to be installed between the roof deck and the shingles. Underlayment is water-resistant or waterproof and can be the difference between allowing water into your home or completely preventing a leak. Depending on your local climate, the correct underlayment may also be important for preventing leaks from ice and snow buildup on the roof. For East Texas, Houston and surrounding areas, the underlayment is particularly important for preventing leaks from wind driven rain. However, not all roofers install the same kinds of underlayment, and even when the proper underlayment is used, it may not be installed in all the right areas. Waterproofing underlayment (ice & water shield) is applied to the valleys, by almost all roofers. It is required by the manufacturer to have waterproofing underlayment installed along the rake walls, along the eaves, at any flashing, at any penetrations (pipes), and on low slopes (> 2:12 to < 4:12). Choosing the appropriate underlayment and installing it correctly easily saves homeowners from future leaks.

• 15 & 30 lb Asphalt Felt Paper
• RoofRunner Synthetic Underlayment
• Diamond Deck Premium Synthetic Underlayment
• DryRoof SA Waterproofing Underlayment
• WinterGuard Waterproofing Underlayment
• Grace Premium Waterproofing Underlayment

Depending on the area where you live, there may be different sizes and types of drip edge required for roof installation. Many builders neglect to install drip edge, if the local inspectors do not enforce drip edge as being required by building codes. Most roofing materials manufacturers do require drip edge along the eaves and rakes of the roof (the entire perimeter). In areas along the coast, the state of Texas requires that roofs be inspected by the Texas Department of Insurance in order to get a WPI-8 certificate, allowing homeowners to get windstorm insurance.  At Elite Roofers, we install the 2" drip edge as a standard, with type DL used on any luxury roofs. 1.5" drip edge, while common on builder grade homes, is no longer up to code. Galvanized drip edge, while less expensive than pre-painted, is used by some roofers, but we prefer the baked enamel painted drip edge for durability and aesthetic appeal.

• 1.5" Drip Edge 
• 2" Drip Edge
• Type DL Drip Edge
• 4x4 Drip Edge (for Low Slopes)
• TDI Windstorm Compliant Drip Edge

More info on Pipe Jack Boots coming soon.

• Plastic Base Rubber Pipe Jack Boots
• Metal & Rubber Pipe Boots
• Lead Pipe Jacks
• Bullet Boots
• Rain repair collar
• High Temperature Silicone Metal Roofing Pipe Flashing Boots
• Soffit Vents
• Under-shingle Vents

More information coming soon.

• Base
• Collar
• Cap

More information about Starter Shingles, coming soon.

• Cut 3-Tabs (The old way, not Elite) 
• CertainTeed Starter Shingles
• CertainTeed High Performance Starter Shingles
• Luxury Starter Shingles

Only available from a certified CertainTeed roofing company, SureStart™ PLUS enhanced warranties extend the non-pro-rated portion of the warranty on a CertainTeed Integrity Roof System™ and add other warranty benefits as well. As a SELECT ShingleMaster™ company, Elite Roofers can offer roof replacement with the best CertainTeed warranties, including, up to 25 years of workmanship coverage.